BG Cube Home Kit

The updated BioGeometry Home Kit includes the same core shapes as previous generations, with the addition of two new shapes specifically designed to further support the harmonization of geopathic stress and electromagnetic fields (EMF).

Thanks to these enhancements, the new single-cube version now covers the same area—approximately 3,000 sq. ft.—as the previous three-cube kit.

As with earlier versions, the kit also includes attachments for your electrical panel and incoming water pipes, along with additional “L” stickers for your Wi-Fi router and windows (North, South, East, and West). If your home doesn’t have a window on one side, you can simply place the sticker on the wall facing that direction.

The components of the new home kit are as follows:

• 1 x Home Energy-Balancing Cube.
• 1 x BioGeometry Clearing Tray (Gold tone version) 
• 3 x Electricity Attachments. (labelled with E )
• 1 x 16/19 attachment (labelled with E.P. )
• 2 x Water Attachments
• 8 x L90 Stickers (Version 2019)
• Additional L90s can be placed on mirrors and wireless devices around the home.
• The recommendation for laptops is two new L90 stickers plus a Wi-Fi sticker on the laptop for the best effect.
• An L66 should also be added to the laptop charger.
• For those with only 1 or 2 Wi-Fi stickers on a router, you can exchange one Wi-Fi sticker with the new L90 to get the added emotional harmonization that the L90 provides

Instructions for use:
Home Energy-Balancing Cube

• Place the cube in the home on a light-coloured surface or a plain white sheet of paper with the text on the bottom. Try to keep a 10 cm radius of empty space around the cube.
• Ideally, the cube would be placed on a small side table on its own so as not to accidentally place objects near it, thus reducing its effect.
• Avoid placing the Cube on top of or beside electrical appliances, in front of mirrors, inside closed drawers, or near large metal objects.
• The cube should be placed on the accompanying BioGeometry Clearing tray for 5 minutes every day (if it is forgotten on the tray, it’s not a problem, but it is not working at its fullest while on the clearing tray). Remove the cube from the tray for a minute and place it on the tray again to clear, then place it on your light surface or white piece of paper.
• It is recommended to clear the cube right before bedtime every night.
• *Note that if adding any additional cubes, they need to be a minimum of 15 meters(50 feet) apart for the best effect.*

Water Attachments

• Use double-sided tape or plastic cable ties to place one water attachment on the main water pipe entering the home and the second on the hot water pipe.
• Electricity Attachments
• One electricity attachment should be placed on the main circuit breaker panel and use double-sided tape.
• An additional attachment can be placed on the home's electricity meter if applicable. Do not cover the attachments with any tape.
• *In addition to the E attachment, one 16/19 (E.P.) attachment should also be placed on the panel*
• Any extra E attachments can be attached to electrical wires beside the bed and any other devices around the house using plastic cable ties
• Accompanying L90 Stickers
• 2 x L90 stickers should be placed on the home’s Wi-Fi router. No specific orientation is required
• 1 x L90 sticker should be placed on the home smart meter if applicable
• 1 x L90 placed on a window on each of the four sides of the house (total 4)
• Additional L90 stickers can be placed on the TV, wireless devices in the home, and mirrors

*BioGeometry is not a form of medical diagnosis or treatment but is long-term environmental support for the body’s energy system and all types of treatment. Under no circumstances should BioGeometry products replace professional medical treatment.