BG Cube Home Kit

• The new BioGeometry home kit has the same set of shapes as in previous generations, with the addition of 2 new shapes to further address the resonant effects of geopathic stress and EMF.
• The one-cube version now covers the same space as the previous generation of the 3-cube home kit of approximately 3000 sq. ft.
• As with previous versions, attachments are also included for the electric panel and incoming water pipes, as well as additional "L" stickers to place on the home's Wi-Fi and windows.

• 1 x Home Energy-Balancing Cube.
• 1 x BioGeometry Clearing Tray (new clear version) Please use etched side up.
• 3 x Electricity Attachments. (labelled with E )
• 1 x 16/19 attachment (labelled with E.P. )
• 2 x Water Attachments
• 8 x L90 Stickers (Version 2019)
• Additional L90s can be placed on mirrors and wireless devices around the home.
• The recommendation for laptops is two new L90 stickers plus a Wi-Fi sticker on the laptop for the best effect.
• An L66 should also be added to the laptop charger.
• For those with only 1 or 2 Wi-Fi stickers on a router, you can exchange one Wi-Fi sticker with the new L90 to get the added emotional harmonization that the L90 provides

Instructions for use:
Home Energy-Balancing Cube

• Place the cube in the home on a light-coloured surface or a plain white sheet of paper with the text on the bottom. Try to keep a 10 cm radius of empty space around the cube.
• Ideally, the cube would be placed on a small side table on its own so as not to accidentally place objects near it, thus reducing its effect.
• Avoid placing the Cube on top of or beside electrical appliances, in front of mirrors, inside closed drawers, or near large metal objects.
• The cube should be placed on the accompanying BioGeometry Clearing tray for 5 minutes every day (if it is forgotten on the tray, it’s not a problem, but it is not working at its fullest while on the clearing tray). Just remove the cube from the tray for a minute and place it on the tray again to clear, then place it on your light surface or white piece of paper.
• Use the clearing tray with the etched side facing up.
• It is recommended to clear the cube right before bedtime every night.
• *Note that if adding any additional cubes, they need to be a minimum of 15 meters(50 feet) apart for the best effect.*

• Place one water attachment on the main water pipe entering the home and the second on the hot water pipe using double-sided tape or plastic cable ties.
• Electricity Attachments
• One electricity attachment should be placed on the main circuit breaker panel and use double-sided tape.
• If applicable, an additional attachment can be placed on the home's electricity meter. Do not cover the attachments with any kind of packing tape
• *In addition to the E attachment, one 16/19 (E.P.) attachment should also be placed on the panel*
• Any extra E attachments can be attached to electrical wires beside the bed and any other devices around the house using plastic cable ties
• Accompanying L90 Stickers
• 2 x L90 stickers should be placed on the home’s Wi-Fi router. No specific orientation is required
• 1 x L90 sticker should be placed on the home smart meter if applicable
• 1 x L90 placed on a window on each of the four sides of the house (total 4)
• Additional L90 stickers can be placed on the TV, wireless devices in the home, and mirrors

*BioGeometry is not a form of medical diagnosis or treatment but is long-term environmental support for the body’s energy system and all types of treatment. Under no circumstances should BioGeometry products replace professional medical treatment.